Clemson University - Autonomous Systems
  • Clemson University - Autonomous Systems
  • Development Robots
  • Drone Development
    • GAAS
      • Hardware Setup
      • Software Setup
      • Flight Safety
      • Field Testing
      • Technical Summary
    • Tello - HumanPose
      • Hardware Setup
      • Software Setup
      • Flight Safety
      • Field Testing
      • Technical Summary
      • Changelog
    • NVIDIA Redtail Project
      • Hardware Setup
      • Software Setup
      • Flight Safety
      • Field Testing
      • Technical Summary
  • Ground Vehicle Development
    • Milieu Tanks
      • Hardware Overview
      • Software Setup
      • Field Testing
      • Next Steps
    • F1TENTH
      • 2020 July Competition Overview
      • Simulation Gym Setup
      • Software Setup
      • Package Overview
      • Room for Improvement!
  • Multi-Agent Development
    • Hardware Overview
    • Turtlebot Multi-Agent SLAM
      • Software Setup
      • Testing Explore-Lite
      • Findings
    • Multi-Agent Networking
      • Protocols and Topologies
        • Protocol Definitions
      • Hardware
        • XBee Configuration
        • Guide to XCTU
      • ROSSerial Connection Guide
        • Troubleshooting
      • ROS 2
        • ROS 1 Multimaster Packages
        • Testing Multimaster Communications
  • Meet Our Team
Powered by GitBook
On this page
  • Steps for Field Testing
  • Expected Field Testing Results

Was this helpful?

  1. Drone Development
  2. Tello - HumanPose

Field Testing

PreviousFlight SafetyNextTechnical Summary

Last updated 4 years ago

Was this helpful?

Steps for Field Testing

  1. Launch the Docker Container

  2. Turn the Tello Drone on

  3. Connect to the Tello's WiFi

  4. Launch the HumanPose Program

Expected Field Testing Results

Below are videos demonstrating the pose estimation of the HumanPose software in indoor and outdoor environments.