Flight Safety
Preflight Checklist
Before testing and the drone takes flight, the following needs to be checked before flight:
You are in an open area free of any humanoid-shaped objects
The area has relatively low or no wind and has fair weather with good sunlight exposure.
The camera is free of any visible debris
The battery is properly installed
The Computer running the Docker container should be powered on
The Docker container should be active
The Drone is turned on
The Drone is connected over wifi to the Computer
The Humanpose software is operational
There is a visible camera feed on the computer from the drone.
The overlay on the camera feed is updating properly
The battery readout from the drone is greater than 50%
Arial Saftey Features
During Flight, there is an internal timer that, if a command has not been sent in 15 seconds, the drone will automatically land.
If the Drone loses wireless connection to a computer, the drone will automatically land.
During flight, there is an emergency landing feature that will force the drone to land in high winds and rain.
During flight, there is an auto-leveling feature within the drone's infrastructure to allow for stable flight.
Emergency Shutoff Features
During Flight, there is an internal timer that, if a command has not been sent in 15 seconds, the drone will automatically land.
If the Drone loses wireless connection to a computer, the drone will automatically land.
While on the ground, there is an internal timer that, if a command has not been sent in 2 minutes, the drone will automatically shutoff.
During Flight, there is an emergency landing feature that will force the drone to land in high winds and rain.
During flight, there is an auto-leveling feature within the drone's infrastructure to allow for stable flight.
Last updated